Loading...
Wondering if you are eating enough protein? A 160 lb man holding at maintenance training 3 to 5 days per week needs about 137 grams of protein per day, split across 4 meals of about 34g each. That number is anchored to lean mass, not total body weight.
TDEE: 2566 kcal (Moderately Active, moderate exercise 3-5 days per week). Lean mass: 131 lbs. BMR: 1655 kcal (Katch-McArdle).
| Schedule | Protein per meal |
|---|---|
| 3 meals per day | 46g |
| 4 meals per day | 34g |
| 5 meals per day | 27g |
160 lb is where training history starts to show up in the numbers. A 160 lb moderately active trainee who has been lifting for two years carries more lean mass than the 25% (female) or 18% (male) body fat default, and the calculator will slightly under-estimate their protein need. If you have been training for a while, nudge toward the upper end of the range we give you.
Protein targets at 160 lb land between 120 and 165 grams per day across goals and training statuses. At bulking surplus, this is where meal size starts to get genuinely comfortable rather than force-fed. Four 40-gram protein meals plus a shake hits the number without stomach acrobatics.
The pattern Andrew sees most at 160 lb is the "I lift but I'm not getting bigger" problem. The diagnostic is almost always under-fed protein or under-fed calories, usually both. Run the calculator honestly, hit the number for four weeks, and the problem resolves.
Maintenance is the phase most people think is the boring one. It is actually the one that determines whether any of your other phases stick.
Maintenance means calories match TDEE and body comp drifts quietly toward whatever your protein, training, and sleep habits are pointing at. If your habits are solid, you get leaner over months without trying. If they are shaky, you get softer the same way. The phase reveals what your underlying routine actually does when it is not being forced one direction by a deficit or a surplus.
We use the same protein target as bulking (2.3 g/kg lean mass) because the muscle-preservation case does not disappear when calories stop moving. Fat stays at 30% of calories, carbs fill the rest. You have the most flexibility here. You can afford a weekend restaurant meal, a high-carb training day, a low-carb travel day, and the phase absorbs the variance.
The mistake Andrew sees most often during maintenance is people stop weighing their food because "I know what I eat." Two weeks later the protein is 40 grams under target because chicken breasts are bigger than they used to be, or the yogurt portion doubled. Recalibrate one week per quarter. Weigh everything for seven days. Adjust. That is the whole maintenance discipline.
The male version of the protein math starts from a higher average lean mass assumption. We use 18% body fat as the default for moderate training status, which means the lean-mass anchor for the protein calculation includes more muscle tissue than the equivalent female page. Your absolute protein number is higher because your lean mass is higher, not because male physiology asks for a different gram-per-kilogram ratio.
Testosterone's role in the muscle-protein-synthesis ceiling matters here. Higher natural testosterone supports a higher MPS rate per meal, which is why the classic "30g per meal" rule-of-thumb often fits male trainees comfortably at three to four meals a day. Schoenfeld and Aragon's 2018 review on per-meal distribution supports 0.4 g/kg body weight per meal as a functional ceiling, which for a 180 lb male lands near 32 grams per meal (Schoenfeld and Aragon, 2018, JISSN). We show you four-meal and five-meal splits so you can pick the pattern that fits your schedule without over-engineering a single mealtime.
Andrew watches male trainees under-eat protein more often than women do, especially at sedentary or moderate training levels. The assumption is "I'm not lifting heavy, I don't need it." The assumption is wrong. Lean mass preservation is not contingent on whether you had a gym session today.
Moderate means 3 to 5 structured training sessions per week, usually resistance training with some cardio mixed in, and a reasonable amount of daily movement outside the gym. This is where most FitCommit users sit and it is the band the macro framework was calibrated against.
We use a 1.55x BMR activity multiplier here. Not the most aggressive setting but the one that matches the actual training reality for the majority of people who use a calculator like this. If you lift three times a week and run twice, you are in this band.
Protein on a moderate page lands at the calibrated target: 2.6 g/kg lean mass for cutting, 2.3 g/kg for bulking and maintenance. These numbers have the most evidence behind them for your profile because the ISSN 2017 position stand and nearly all of the resistance-training research tested subjects in exactly this training volume range.
The common pattern Andrew sees with moderate-activity trainees is protein drift on rest days. They hit 155 grams on training days because the workout reminds them to eat, and they eat 100 on rest days because the reminder is gone. Over a month that averages out to a deficit below the calibrated target. The calculator shows you one daily number for a reason: hit it every day, including rest days, and the phase actually produces the result the math predicted.
Maintenance is the phase most people skip and most programs ignore. It is also the phase where body composition quietly changes for the better or worse over the long run. Your job at maintenance is not to force progress, it is to defend it.
We use Andrew Menechian's framework. Calories match TDEE. Protein lands at 2.3 grams per kilogram of lean body mass, the same number we use for bulking. Phillips and Van Loon's 2011 review in the Journal of Sports Sciences laid out the case that active adults benefit from protein intakes of 1.3 to 1.8 g/kg body weight across training years, which lines up with our LBM-anchored 2.3 g/kg target for a typical lean trainee (Phillips and Van Loon, 2011, J Sports Sci). The ISSN 2017 position stand puts the range at 1.4 to 2.0 g/kg body weight for exercising individuals (Jäger et al, 2017, JISSN); we sit at the upper end because the cost of slightly too much protein is nothing and the cost of slightly too little is measurable in recovery quality.
Fat sits at 30% of calories, carbs fill the rest. This is the most forgiving macro distribution we give you. Maintenance is where the body can absorb day-to-day variance without breaking the plan. Miss a protein meal on a Saturday at a restaurant, catch it back the next day, and the phase continues. That flexibility is what makes maintenance sustainable for years.
The common mistake Andrew sees with users in maintenance is underestimating how much protein they actually eat. They log "one chicken breast" without weighing it and the entry is low by 50%, or they skip tracking on weekends and drift for two days. Two weeks of that and the scale moves down or stays flat while muscle quietly softens. The fix is simple: weigh protein sources for one week every quarter. Recalibrate. Continue.
Schoenfeld and Aragon's 2018 review on per-meal protein distribution is worth reading during maintenance specifically because meal timing becomes your lever when you are not driving change through calorie manipulation (Schoenfeld and Aragon, 2018, JISSN). Three solid meals spaced four to six hours apart with 30 to 50 grams of protein each is the low-friction version. Four meals is the version that shows up in better body comp over the long run.
Antonio's 2015 one-year crossover in trained males confirms that sustained high-protein intakes produce no adverse markers in healthy populations (Antonio et al, 2015, J Nutr Metab). The worry that maintenance-level protein at 2.3 g/kg lean mass is "too much" is a holdover from the 1989 RDA era and has not survived the research of the last two decades.
This is educational, not medical advice. If you have kidney disease, liver disease, are pregnant, or take medications affecting protein metabolism, talk to your doctor before changing your intake.
Hit your protein target without the guesswork.
Scan your meal, see the protein count, and close the gap with one tap.
"I can't eat enough protein without feeling sick" shows up constantly in bulking threads. Two things usually fix it. First, stop aiming higher than 2.3 g/kg of lean mass, because above that you're paying for chicken you won't use. Second, drink some of it. A shake between meals is not a shortcut, it's a distribution tool when three solid meals can't carry the load.
Mayo Clinic's protein guidance is accurate for the population it was written for: the general adult public, most of whom are sedentary and most of whom are not trying to preserve or build muscle. For that audience, the RDA-anchored numbers Mayo cites are a reasonable starting point.
They are not the right numbers for someone who lifts three times a week and wants to hold muscle through a cut. Mayo's framing treats protein primarily as a nutritional requirement to meet, not as a performance variable to calibrate. That framing is medically safe and functionally incomplete for anyone reading this calculator.
The research has moved. Phillips and Van Loon's 2011 review, the ISSN 2017 position stand, Morton's 2018 BJSM meta-analysis, and Helms' 2014 evidence-based review for natural bodybuilding all point at targets substantially higher than the Mayo-cited RDA. Our calculator is built on that research. If your protein question is "am I getting enough for basic health," Mayo answers that. If your question is "am I getting enough to protect or build muscle while training," we answer that.
Reviewed by Andrew Menechian, Head of Fitness at FitCommit. Last updated 2026-04-24.
Yes, but you need to hit the same total daily protein target and pay closer attention to leucine. Plant proteins like pea, soy, rice, and lentils are lower in leucine per gram than whey or chicken, and leucine is the amino acid that triggers muscle protein synthesis. The workaround is straightforward: eat more total protein, roughly 10 to 20% above the omnivore target, and include soy or pea isolate as one of your daily sources since both hit the leucine threshold efficiently. The ISSN 2017 position stand notes that plant-based diets can support hypertrophy when total protein and leucine are adequate (Jäger et al, 2017, JISSN). A calculator that targets 2.3 g/kg lean mass still applies. You just fill the grams from different sources.
Women need the same protein per kilogram of lean body mass as men. Biology does not care about gender at the muscle-synthesis level. A woman cutting targets 2.6 g/kg LBM, a woman bulking or maintaining targets 2.3 g/kg LBM. Because women on average carry more body fat at the same weight, the gram total is usually lower than a man of matched body weight, not because the rule is different but because the lean mass is different. The ISSN 2017 position stand does not differentiate protein targets by sex for exercising adults (Jäger et al, 2017, JISSN). If you are pregnant or breastfeeding, protein needs rise further and you should work with a clinician, not a calculator.
Total daily protein matters more than timing. Distribution matters more than the post-workout window. Schoenfeld and Aragon's 2018 review concluded that three to four protein feedings of 30 to 50 grams each, spaced three to five hours apart, produced better muscle protein synthesis outcomes than the same total protein packed into one or two meals (Schoenfeld and Aragon, 2018, JISSN). The old "anabolic window" of 30 to 60 minutes post-workout has been softened by the research. You do not need to sprint to the shaker bottle. You do need to avoid going six hours between meals on training days. Hit the daily total, spread it across the day, and the timing optimizations are rounding errors.
Estimate it. Navy circumference method, a bioimpedance scale, or a DEXA scan all give workable numbers. For most adults, default categories get you close enough to start: men average around 18% body fat, women around 25%. If you are visibly lean (abs showing), subtract five points. If you carry obvious excess fat, add five to ten. From there, lean body mass = total weight × (1 minus body fat decimal). Multiply LBM in kilograms by 2.6 for cutting or 2.3 for bulking and maintenance. The number will be within 10 to 15 grams of the precisely measured version, which is well inside the daily variance most people already have in their eating.
Previous weight
150 lbs male maintenance moderate
Next weight
170 lbs male maintenance moderate
Same weight, different goal
160 lbs male cutting moderate
Same weight, different goal
160 lbs male bulking moderate
Other gender, same goal
160 lbs female maintenance moderate
Different training status
160 lbs male maintenance sedentary
Different training status
160 lbs male maintenance very active
Full macros for this profile
Protein + carbs + fat breakdown